SimRacing.org.uk

Race Room Experience => RRE Races => Topic started by: goldtop on December 22, 2016, 12:20:17 PM +0000



Title: RRE Season 4 (2017) Race Room GTR3 Sprints - Paul Ricard - Apr 16
Post by: goldtop on December 22, 2016, 12:20:17 PM +0000
(http://i128.photobucket.com/albums/p195/goldytops60/R3E%20Nords%20Patch%20-%20GTR3_zpsbsubgvyx.jpg)

Practice: 20:00 BST (30 mins)
Qual: 20:30 (15 mins)
Race: 20:45 ~ 40 Mins

Cars allowed: Any car from GTR3 class
Track: Circuit Paul Ricard Solution 1A
Time of Day Setting: Afternoon

Start: Rolling
Tyre wear: Normal
Fuel consumption:  Normal
Pit-stops: None required

Server: Simracing.org.uk
Password: see above (#post_event_password)

Notes:
(1) It's best if all drivers can make sure they are connected before the Qualifying session as drivers on track during qualifying will not see
cars that join after they are on track until they go back to the garage.
(2) Please make sure you are fully aware of the SimRacing.org.uk Rules (https://www.simracing.org.uk/index.php?pid=7) especially the
rules about in-game chat messages.
(3) You will need to install Race Room Racing Experience from Steam, and have the Euro and American Track Packs for this series (And maybe another
non pack track occasionally)
(4) Please exercise caution when pitting as some tracks have a speed limit.

(5) Please follow the SROUK guidelines for using kerbs etc. Please keep 2 wheels on the track surface (kerbs do not count as track surface)
Excessive cutting of corners will seen as cheating and the results may be altered to reflect this.

Driver lists can be found on the championship standings page (https://www.simracing.org.uk/smf/index.php?action=LM2R;group=578)

This race will be a rolling start following a formation lap and the procedure is as follows:

*It will be the pole sitter's responsibility to complete the first lap at a pace that allows the rest of the grid to follow comfortably
*There should be no overtaking or hard accelerating/braking
*Drivers should avoid getting too far behind or too close to the driver in front
*Approximately 20 seconds before crossing the start line the pole sitter should slow down to a speed of no more than 50mph (80km/h)
*Each following driver shall close up directly behind the driver in front also maintaining a speed of no more than 50mph (80km/h)
*The pole sitter should maintain that speed until they cross the start line and then accelerate away to start the race (lap2)
*Each following driver should only accelerate when the driver directly ahead does (they do not have to wait until crossing the start line)
*No overtaking is allowed before crossing the start line at the completion of the formation lap


Title: Re: RRE Season 4 (2017) Race Room GTR3 Sprints - Paul Ricard - Apr 16
Post by: spanner on April 15, 2017, 09:14:29 PM +0100
Damn, another GT3 race i miss. At silverstone on sunday for WEC but wont be heading straight back home.


Title: Re: RRE Season 4 (2017) Race Room GTR3 Sprints - Paul Ricard - Apr 16
Post by: SRW on April 15, 2017, 11:48:53 PM +0100
I was at Silverstone watching the WEC practice sessions yesterday and will be racing on Sunday night!


Title: Re: RRE Season 4 (2017) Race Room GTR3 Sprints - Paul Ricard - Apr 16
Post by: goldtop on April 19, 2017, 07:35:49 PM +0100
Just wondering if we have results for this race or are there still problems?


Title: Re: RRE Season 4 (2017) Race Room GTR3 Sprints - Paul Ricard - Apr 16
Post by: Eck Simpson on April 19, 2017, 09:13:19 PM +0100
Four of us completed the race.


Title: Re: RRE Season 4 (2017) Race Room GTR3 Sprints - Paul Ricard - Apr 16
Post by: phspok on April 19, 2017, 09:44:58 PM +0100
Sorry, looking at wrong event. There is a results sfile, but it's complaining about the "Circuit mappaing found, but for wrong tracK"
As it often does.. I will try a few variations

EDIT: Results done. Had to change to 1A and add the BMW 6
My bad, I lost track of what day it is.


Title: Re: RRE Season 4 (2017) Race Room GTR3 Sprints - Paul Ricard - Apr 16
Post by: goldtop on April 20, 2017, 08:35:27 AM +0100
....thanks Matt.