SimRacing.org.uk

Practise: 19:45 (45 mins)
Qual: 20:30 (15 mins)
Race: 20:45 (60 minutes)

Cars allowed:

2014 Coyote Corvette Daytona Prototype
2014 Dallara Corvette Daytona Prototype

from the car pack below
https://www.racedepartment.com/downloads/ier-car-pack-1-uscc-mod.7348/

Track:
https://www.racedepartment.com/downloads/watkins-glen-international.20204/

Lap times:

stracker.simracing.org.uk:50041/lapstat? (http://stracker.simracing.org.uk:50041/lapstat?)

Time of Day Setting: 14:00
Weather: Clear
Start: Rolling
Tyre wear: Normal
Fuel consumption: normal
Pit-stops: optional

Server track settings:
SESSION_START=100
RANDOMNESS=0
LAP_GAIN=0
SESSION_TRANSFER=N/a

Damage: 70%

PLP App - Not used in this series. Cutting will be monitored on replay and penalties issued for excessive cutting.

Notes:
(1)PLP App - Not used in this event. Cutting will be monitored on replay and penalties issued for excessive cutting.
(2)Please make sure you are fully aware of the SimRacing.org.uk Rules especially the
rules about in-game chat messages.
(3) Please exercise caution when pitting as some tracks have a speed limit.
(4) Please follow the SROUK guidelines for using kerbs etc. Please keep 2 wheels on the track surface (kerbs do not count as track surface)
Excessive cutting of corners will seen as cheating and the results may be altered to reflect this.

(5) Start procedure
*It will be the pole sitter's responsibility to complete the first lap at a pace that allows the rest of the grid to follow comfortably
*There should be no overtaking or hard accelerating/braking
*Drivers should avoid getting too far behind or too close to the driver in front
*Approximately 20 seconds before crossing the start line the pole sitter should slow down to a speed of no more than 50mph (80km/h)
*Each following driver shall close up directly behind the driver in front also maintaining a speed of no more than 50mph (80km/h)
*The pole sitter should maintain that speed until they cross the start line and then accelerate away to start the race (lap2)
*Each following driver should only accelerate when the driver directly ahead does (they do not have to wait until crossing the start line)
*No overtaking is allowed before crossing the start line at the completion of the formation lap

Practice server is up for this Sunday's race!

Now to work out how to upload the results from the last race now that the results fairy has disappeared  :(

that darn fairy...


Anyway, looking forward to some more DP fun so cya on sunday  :)

I've just been hit with a big workload so will have to sit this one out and probably others over the coming weeks. Have fun.

Any idea which track version?

Boot layout

Is server up?

Mmm might skip this one, as I hurt my shoulder today. Starting to feel more pain and  not looking forward tot driving for an hour..

Is the server up?

I guess it's down if you don't see it either Alex...is SRW only who can put it up?

server is up

its there for me.....oh ok

That total BS, soon as I get in server I noticed that wrong version practised. Tyres didn't take a load and over heated after 3 laps, opening server bit earlier could help...

The server has been up since Monday. Sometimes it inexplicably turns itself off, could have been that

Saturday it was down anyway, for future maybe it's better let people know right track version in race post least if no one have time to check is server up & ok.

Hi SRW - Looking at the fastest laps above, you've linked to the 60's version of Watkins Glen GP circuit and not the modern Boot. We've never raced the GPL cars on the modern layout.

As the race hasn't been run yet you might be able to fix it by just changing the track in the drop down rather than deleting the event and re-creating it (You'll be lucky to get a Grp C/Modern F1 car around the boot in 1M04s ;) - The DP's are in the 1:30's based on a test race I ran here last year)

This is the correct version: https://www.simracing.org.uk/smf/index.php?topic=26812#event16072 (https://www.simracing.org.uk/smf/index.php?topic=26812#event16072)

Thanks for pointing that out FMG. I followed your instructions, seems to have worked ok