Cockpit Genesis & AC & Zonda & Nordchsleife

http://www.youtube.com/watch?v=v08N3LfeQbM

Hello again to everybody

Here the news about our mods.

The new units (NOW AVALIABLE) will have the next improvements :

-This nut to fix the screw adjustment of pressure sensor.
-Compatible with Ps3/Xbox
-Pressure Sensor 60 bars

ORDERS ->
http://www.totalspanishsimulator.com/wp/reservas/

After several days testing the G25/G27 Brake Mod, here our feelings.

-When I placed it and pressed with my foot,I said "Carlos, this is another world."

SETUP

It removes red brake pipe which carries the G25/G27 spring inside, and placed the damper / spring with holes compatible with G25/G27.

Disconnect the 3 wires of the potentiometer (it will be disabled), and connect them to wires of pressure sensor.

BLACK / BROWN = GROUND
RED / ORANGE = 5V
GREEN / WHITE = SIGNAL

G27 BRAKE BLACK WIRE - BLACK OR BROWN CONNECTOR PRESSURE SENSOR
G27 BRAKE RED WIRE - RED OR ORANGE CONNECTOR PRESSURE SENSOR
G27 BRAKE WHITE WIRE - GREEN OR WHITE CONNECTOR PRESSURE SENSOR


SETTINGS

-Adjust the spring tension to feel the inicial touch of brake. Harder or softer, if you want that the brake back off more slowly or faster.

-Adjust with 1 turn 360º of Allen screw of hydraulic tank to feel harder or softer the second part of way of brake. Min 0º. Max 360 º. And all intermediate positions.


FEELING

-The feel is like a real brake. You feel the brake has an internal hydraulic circuit in and above all, that when you release the brake, it rises a little slower and very smooth, thanks to the damper that goes inside the spring.

With the allen screw (adjustment hydraulic tank), you adjust the feeling of the second part of the braking (which is exponential) .

-Leave it softer, so there is more travel in the pedal
-Let him harder, so that there is less travel in the pedal, and note the force much more

That means :

-You can put the brake pedal with 1 cm of way and you need to make more force to brake (only force, without the pedal moves)

-Or you adjust it to move the pedal aroudn 3.5 cm (the maximum allowed) and you feel the force at the end of de pedal.

-Or all the intermediate steps, more way, less way, braking too hard or less hard.

So you forget to block brakes in the simulator.

NOTES

-It is tested with the pedals connected directly to the wheel G25/G27, leo bodnar cable and similar mainboards/controllers. Goes perfectly in all simulators (iRacing, rfactor, AC, Nkpro, RBR, GTR2 ...)

-The pressure sensor has a resolution of 24 bits.

-It is recommended to connect the pedal to leo bodnar cable (10 bits equivalent to 1023 steps). Or the BU0836 who is 12 bits (4095 steps). Well, of course, if you have a controller with higher resolution, much better. Simply because more resolution, braking will work better in the simulator.

-In iRacing, it is important to change the BRAKE FORCE CURVE FACTOR Options / controls to 0 so that the braking is detected as sends the pressure sensor.

-Finally, remark that if someone (which I doubt) is accustomed to braking with potentiometers, just leaving the original connectors cable connected to the potentiometer G27 brake and you can adjust the hardness, travel and feeling the mod with the settings mentioned above.

(There will be avaliable the same brake mod but without pressure sensor, cheaper.)

------

We will upload new photos and installation guide.

We are manufacturing the mods of pre-orders. Coming soon more news.

In one or two weeks we will finish the testing Beta-tester G25/G27 brake mod, and we will be passed to confirm pre-order by partial or full payment.

And we'll check if all confirmed pre-orders can receive their mod in the first delivery of shipments. Otherwise, the remaining pre-orders (in order of registration and payment confirmation partial / total) will have to wait a little more for the next delivery.

It will be possible adjust the linear force, progressive force and way of pedal as the customer wants.

And use the Pressure sensor or the original potentiometers of pedal G25/G27.

Photos Cockpit Genesis of Javier C.

http://www.totalspanishsimulator.com/wp/blog/fotos-cockpit-de-javier-casas/

Message of my partner Alfredo,

Hello, for all pre-orders, the price will be 99 eur.

After, surely we will have an increase of almost 50%, but I always prefer to release the first units with a price cost (it's another way of advertising)



Here you have a photo of industrial pressure sensor. Only the sensor sold to the public, is more expensive than the entire mod, but I prefer to benefit customers, with pre orders offers.

Definitely, the best advertising is a satisfied customer, and that we have met so far.

Best regards

This will be the final version of the Mod Brake G25/G27

-Spring with Damper
-Hose
-Separate tank with pressure sensor

(The model without pressure sensor, will be exactly the same, but using the original brake potentiometers)





http://www.totalspanishsimulator.com/wp/en/reservas/

New Seat Mounting Frames EXTRA 1 and EXTRA 2, for adjusting seat in height and tilt.

More info

http://www.totalspanishsimulator.com/wp/productos/soporte-asiento-extra-1/

http://www.totalspanishsimulator.com/wp/productos/soporte-asiento-extra-2/





---

And the las photos of Sascha with their buttkickers installed

Rafa Iglesias, Top Driver of Richard Burns Rally, has already mounted the 3 Screens Frame of TSS in his rig.

Enjoy it.

http://www.totalspanishsimulator.com/wp/en/blog/fotos-de-rafa-iglesias/

More news.

Finally, after seeing that some users prefer the brake mod without pressure sensor, we'll do the same MOD BRAKE, one with pressure sensor and another without it.

Brake Tss-Mod "pressure sensor" G25/G27.
Adjustable linear spring,

damper to avoid the rebound of pedal,

Industrial Pressure sensor with high precision and hardness (fully adjustable)
(very different than pressure sensors (load cells) of commercial pedals. Some users who have checked the commercial load cells, don't be very satisfied with the result).

Also adjustable travel, which can exert the maximum braking force from 1 cm pedal travel, until 3.5 cm of pedal travel (max. of G25/G27)

Around 99 eur.

----

Brake G25/G27 Tss-Mod.
Exactly the same MOD, but without pressure sensor. ( it will works with the potentiometer of G25/G27 or hall sensor)

35-45% cheaper. And it's possible to upgrade it to pressure sensor.
---

pd = We'll receive in a few days the pressure sensors to finish the Mod.

NEWS

First of all, I wanted to apologize from TSS by the delay of the MOD BRAKE G25/G27.

I wanted to report that we have decided to focus on finishing the Mod with pressure sensor and stop making the previous model, which was with potentiometer or hall sensor.

We want dedicate 100% of our time in finish the Mod with pressure sensor, because it is the best feeling that gives (almost like a real brake).

Photos coming soon.

It will be a spring with damper (adjustable) and air pressure (adjustable too), and its pressure sensor connected like a quick release to the wires from the brake pedal. It's possible to adjust the hardness and distance, with real braking feelings.

Cheers

Coming soon

We show you the last update. There have been some changes and improvements.

Onboard - Cockpit Genesis & NkPro

http://www.youtube.com/watch?v=n7wK3syV4I4

We show you some photos of one of the best rigs with our Cockpit Genesis.

Our customer, from Austria, has installed =

"Ultraforce GS-4", 3 screens 27", ipad, 2 shifters, fanatec clubsport, pedals CSP, button box DSD y Mini Display.