by SimRacing.org.uk  

Read this first!    
 
March 28, 2024, 01:06:41 PM +0000 *
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
Series
Recent
Forthcoming
News: Upcoming Events are as follows: 1 - RRE/AC/ACC Sunday - No event ; 2 - GTL Monday - No event 3 - AC Wed - No event 4 - RRE Thursday - No event

RACE SERIES KEY A19=Assetto Corsa, E10=Raceroom Experience, L23=UKGTL GT Legends, LN2=Legacy NoGrip GT Legends, LNE1=Legacy NoGrip GT Legends Endurance races
 
  Start Here      Home   Help Search Calendar Login Register     LM2 Replays Rules Links Circuits Teams  
Pages: 1 2 3 [4]
  Print  
Author Topic: TSS, New Sponsor of Xavier Busoms (aka busi)  (Read 38543 times)
0 Members and 1 Guest are viewing this topic.
carloscasas
Jr. Member
**
Posts: 50



View Profile
« Reply #45 on: April 18, 2013, 09:14:47 AM +0100 »

This will be the final version of the Mod Brake G25/G27

-Spring with Damper
-Hose
-Separate tank with pressure sensor

(The model without pressure sensor, will be exactly the same, but using the original brake potentiometers)






http://www.totalspanishsimulator.com/wp/en/reservas/
Logged

carloscasas
Jr. Member
**
Posts: 50



View Profile
« Reply #46 on: April 18, 2013, 10:41:52 AM +0100 »

Message of my partner Alfredo,

Hello, for all pre-orders, the price will be 99 eur.

After, surely we will have an increase of almost 50%, but I always prefer to release the first units with a price cost (it's another way of advertising)



Here you have a photo of industrial pressure sensor. Only the sensor sold to the public, is more expensive than the entire mod, but I prefer to benefit customers, with pre orders offers.

Definitely, the best advertising is a satisfied customer, and that we have met so far.

Best regards
Logged

carloscasas
Jr. Member
**
Posts: 50



View Profile
« Reply #47 on: April 25, 2013, 11:42:37 AM +0100 »

Photos Cockpit Genesis of Javier C.

http://www.totalspanishsimulator.com/wp/blog/fotos-cockpit-de-javier-casas/





Logged

carloscasas
Jr. Member
**
Posts: 50



View Profile
« Reply #48 on: April 26, 2013, 06:25:42 PM +0100 »

In one or two weeks we will finish the testing Beta-tester G25/G27 brake mod, and we will be passed to confirm pre-order by partial or full payment.

And we'll check if all confirmed pre-orders can receive their mod in the first delivery of shipments. Otherwise, the remaining pre-orders (in order of registration and payment confirmation partial / total) will have to wait a little more for the next delivery.

It will be possible adjust the linear force, progressive force and way of pedal as the customer wants.

And use the Pressure sensor or the original potentiometers of pedal G25/G27.





Logged

carloscasas
Jr. Member
**
Posts: 50



View Profile
« Reply #49 on: May 17, 2013, 11:55:43 AM +0100 »

After several days testing the G25/G27 Brake Mod, here our feelings.

-When I placed it and pressed with my foot,I said "Carlos, this is another world."

SETUP

It removes red brake pipe which carries the G25/G27 spring inside, and placed the damper / spring with holes compatible with G25/G27.

Disconnect the 3 wires of the potentiometer (it will be disabled), and connect them to wires of pressure sensor.

BLACK / BROWN = GROUND
RED / ORANGE = 5V
GREEN / WHITE = SIGNAL

G27 BRAKE BLACK WIRE - BLACK OR BROWN CONNECTOR PRESSURE SENSOR
G27 BRAKE RED WIRE - RED OR ORANGE CONNECTOR PRESSURE SENSOR
G27 BRAKE WHITE WIRE - GREEN OR WHITE CONNECTOR PRESSURE SENSOR


SETTINGS

-Adjust the spring tension to feel the inicial touch of brake. Harder or softer, if you want that the brake back off more slowly or faster.

-Adjust with 1 turn 360º of Allen screw of hydraulic tank to feel harder or softer the second part of way of brake. Min 0º. Max 360 º. And all intermediate positions.


FEELING

-The feel is like a real brake. You feel the brake has an internal hydraulic circuit in and above all, that when you release the brake, it rises a little slower and very smooth, thanks to the damper that goes inside the spring.

With the allen screw (adjustment hydraulic tank), you adjust the feeling of the second part of the braking (which is exponential) .

-Leave it softer, so there is more travel in the pedal
-Let him harder, so that there is less travel in the pedal, and note the force much more

That means :

-You can put the brake pedal with 1 cm of way and you need to make more force to brake (only force, without the pedal moves)

-Or you adjust it to move the pedal aroudn 3.5 cm (the maximum allowed) and you feel the force at the end of de pedal.

-Or all the intermediate steps, more way, less way, braking too hard or less hard.

So you forget to block brakes in the simulator.


NOTES

-It is tested with the pedals connected directly to the wheel G25/G27, leo bodnar cable and similar mainboards/controllers. Goes perfectly in all simulators (iRacing, rfactor, AC, Nkpro, RBR, GTR2 ...)

-The pressure sensor has a resolution of 24 bits.

-It is recommended to connect the pedal to leo bodnar cable (10 bits equivalent to 1023 steps). Or the BU0836 who is 12 bits (4095 steps). Well, of course, if you have a controller with higher resolution, much better. Simply because more resolution, braking will work better in the simulator.

-In iRacing, it is important to change the BRAKE FORCE CURVE FACTOR Options / controls to 0 so that the braking is detected as sends the pressure sensor.

-Finally, remark that if someone (which I doubt) is accustomed to braking with potentiometers, just leaving the original connectors cable connected to the potentiometer G27 brake and you can adjust the hardness, travel and feeling the mod with the settings mentioned above.

(There will be avaliable the same brake mod but without pressure sensor, cheaper.)

------

We will upload new photos and installation guide.

We are manufacturing the mods of pre-orders. Coming soon more news.
Logged

carloscasas
Jr. Member
**
Posts: 50



View Profile
« Reply #50 on: September 17, 2013, 11:42:51 AM +0100 »

The new units (NOW AVALIABLE) will have the next improvements :

-This nut to fix the screw adjustment of pressure sensor.
-Compatible with Ps3/Xbox
-Pressure Sensor 60 bars

ORDERS ->
http://www.totalspanishsimulator.com/wp/reservas/




Logged

carloscasas
Jr. Member
**
Posts: 50



View Profile
« Reply #51 on: October 24, 2013, 11:56:10 PM +0100 »

Hello again to everybody

Here the news about our mods.

Quote
- The brake Mod is selling to customers around the world. Certainly, everyone is happy with it.  In fact, the comments and opinions of the mod are very good, even many of them have become more consistent in their races avoiding locking wheels and improving the braking control. Several of them have had very good results in hosted and official races in iRacing .

http://www.totalspanishsimulator.com/wp/en/reviews/opiniones-clientes/opiniones-mod-brake-g25g27/

- Coming soon, our friends of InsidesimRacing.tv will make a full review of this mod.

As an advance , here's the first impression ( before the video that they will do) of our friend Shaun Cole.

http://www.insidesimracing.tv/previews/real-car-sim-chassis-part-make-call/

- Our TSS engineer Alfredo is finishing the hall sensor ( desired by many simracers... ) for the gas and clutch pedal of the G25/G27 (can also be used for the brake pedal ) .
This hall sensor will provide a much higher voltage range than current potentiometers, giving you more accuracy, higher resolution and avoiding failures . And of course, with "maintenance 0" , because it does not require cleaning like as potentiometers .
Coming soon more news about this sensor hall, which will be a very low price and will install as a quick release on the pedal.

- Also we are developing a new and unique "sequential shifter " .  It will hasn't the standard mechanism of Springs, and the detection of the Gear will not done with microswitches. The "Feeling" will be a delight for most of simracers, very similar to "sequential shifters" of  High End cars .
Smooth, feeling in your hands when the gear is changed, and with a special Touch. And will be included a spring ( to be installed easily) for simracers that want more force to shift the gears, like the standard Feeling of shifters made with springs.

- Coming Soon more news .

Thanks you very much to all customers who trusted us, and all people that are supporting us and following our progress.

Logged

carloscasas
Jr. Member
**
Posts: 50



View Profile
« Reply #52 on: June 01, 2014, 09:51:29 AM +0100 »

Cockpit Genesis & AC & Zonda & Nordchsleife

http://www.youtube.com/watch?v=v08N3LfeQbM
Logged

Pages: 1 2 3 [4]
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!
Page created in 0.435 seconds with 24 queries.