Jeffrey
Director, AC
SimRacing.org.uk Staff
Hero Member
Posts: 7029
|
|
« Reply #60 on: September 07, 2006, 07:04:53 PM +0100 » |
|
I did some laps and 1:35's are possible. I don't know which version I have (Proton or Deamon), but it's the Playboy one. The heavier of the two.
|
|
|
Logged
|
|
|
|
Dave 'Gizmo' Gymer
Director General
SimRacing.org.uk Staff
Hero Member
Posts: 15100
Currum auriga quasi furtivum
|
|
« Reply #61 on: September 07, 2006, 08:17:32 PM +0100 » |
|
I did some laps and 1:35's are possible. I don't know which version I have (Proton or Deamon), but it's the Playboy one. The heavier of the two.
The Playboy car is the Demon. I'm going to be taking the Spalding Proton.
|
|
|
Logged
|
To finish first, first you must have fins.
|
|
|
Martin Steinmetz
Newbie
Posts: 42
|
|
« Reply #62 on: September 07, 2006, 08:33:35 PM +0100 » |
|
I did some laps and 1:35's are possible. I don't know which version I have (Proton or Deamon), but it's the Playboy one. The heavier of the two.
tested the demon for a few laps too and did some low 34s, so i think at least 33s should be possible ;-)
|
|
|
Logged
|
|
|
|
fozzmeister
|
|
« Reply #63 on: September 08, 2006, 09:23:23 PM +0100 » |
|
Can the practice server run the same password as the actual event, as no GRC members can practice here, or do you want us to run our own practice server?
|
|
|
Logged
|
|
|
|
fozzmeister
|
|
« Reply #64 on: September 08, 2006, 09:33:09 PM +0100 » |
|
My Sebring setup seems to be OK here
VehicleClassSetting="2006 Demon" UpgradeSetting=(5,0) //VEH=GAMEDATA\VEHICLES\DEMON\NEC\NEC_86.VEH //UpgradeClass= //Tires=1 //Force Feedback=1 //Note: settings commented out if using the default
[GENERAL] Notes="" Symmetric=1 //CGRightSetting=0//50.0:50.0 //CGRearSetting=0//45.0:55.0 //WedgeSetting=0//0.00 turns //FrontTireCompoundSetting=0//Dry //RearTireCompoundSetting=0//Dry FuelSetting=54//55 L (16 laps) NumPitstopsSetting=1//1 Pitstop1Setting=69//70 L (20 laps) //Pitstop2Setting=49//N/A //Pitstop3Setting=49//N/A
[LEFTFENDER] //FenderFlareSetting=0//0.0 cm
[RIGHTFENDER] //FenderFlareSetting=0//0.0 cm
[FRONTWING] FWSetting=1//2
[REARWING] RWSetting=4//5
[BODYAERO] //RadiatorSetting=3//4 //BrakeDuctSetting=3//4
[SUSPENSION] //FrontAntiSwaySetting=4//140 N/mm //RearAntiSwaySetting=3//50 N/mm FrontToeInSetting=16//-0.20 deg //RearToeInSetting=22//0.10 deg LeftCasterSetting=40//2.0 deg RightCasterSetting=40//2.0 deg //LeftTrackBarSetting=0//0.0 cm //RightTrackBarSetting=0//0.0 cm //Front3rdPackerSetting=0//0.0 cm //Front3rdSpringSetting=0//Detached //Front3rdSlowBumpSetting=0//1 //Front3rdFastBumpSetting=0//1 //Front3rdSlowReboundSetting=0//1 //Front3rdFastReboundSetting=0//1 //Rear3rdPackerSetting=0//0.0 cm //Rear3rdSpringSetting=0//Detached //Rear3rdSlowBumpSetting=0//1 //Rear3rdFastBumpSetting=0//1 //Rear3rdSlowReboundSetting=0//1 //Rear3rdFastReboundSetting=0//1
[CONTROLS] //SteerLockSetting=10//15.0 deg //RearBrakeSetting=40//55.0:45.0 BrakePressureSetting=9//98% //HandbrakePressSetting=0//0%
[ENGINE] //RevLimitSetting=0//7,500 //EngineBoostSetting=0//1 //EngineBrakingMapSetting=2//2
[DRIVELINE] //FinalDriveSetting=2//10/35 (bevel 1/ 1) //ReverseSetting=0//10/36 (12.600) Gear1Setting=3//20/67 (11.725) Gear2Setting=16//14/29 (7.250) Gear3Setting=28//20/31 (5.425) Gear4Setting=41//40/49 (4.287) Gear5Setting=47//10/10 (3.500) Gear6Setting=52//16/14 (3.063) //DiffPumpSetting=6//60% //DiffPowerSetting=0//0% //DiffCoastSetting=0//0% //DiffPreloadSetting=0//1
[FRONTLEFT] //CamberSetting=15//-3.5 deg PressureSetting=38//128 kPa //PackerSetting=5//0.5 cm //SpringSetting=2//120 N/mm RideHeightSetting=0//3.5 cm //SlowBumpSetting=2//3 //FastBumpSetting=2//3 SlowReboundSetting=3//4 FastReboundSetting=3//4 //BrakeDiscSetting=0//2.8 cm //BrakePadSetting=2//3
[FRONTRIGHT] //CamberSetting=15//-3.5 deg PressureSetting=38//128 kPa //PackerSetting=5//0.5 cm //SpringSetting=2//120 N/mm RideHeightSetting=0//3.5 cm //SlowBumpSetting=2//3 //FastBumpSetting=2//3 SlowReboundSetting=3//4 FastReboundSetting=3//4 //BrakeDiscSetting=0//2.8 cm //BrakePadSetting=2//3
[REARLEFT] CamberSetting=23//-2.7 deg //PressureSetting=40//130 kPa //PackerSetting=5//0.5 cm //SpringSetting=2//120 N/mm RideHeightSetting=15//5.5 cm //SlowBumpSetting=2//3 //FastBumpSetting=2//3 //SlowReboundSetting=4//5 //FastReboundSetting=4//5 //BrakeDiscSetting=0//2.8 cm //BrakePadSetting=2//3
[REARRIGHT] CamberSetting=23//-2.7 deg //PressureSetting=40//130 kPa //PackerSetting=5//0.5 cm //SpringSetting=2//120 N/mm RideHeightSetting=15//5.5 cm //SlowBumpSetting=2//3 //FastBumpSetting=2//3 //SlowReboundSetting=4//5 //FastReboundSetting=4//5 //BrakeDiscSetting=0//2.8 cm //BrakePadSetting=2//3
[BASIC] Downforce=0.500000 Balance=0.500000 Ride=0.500000 Gearing=0.500000 Custom=1
|
|
|
Logged
|
|
|
|
picnic
Director, Servers
SimRacing.org.uk Staff
Hero Member
Posts: 8114
|
|
« Reply #65 on: September 08, 2006, 11:59:57 PM +0100 » |
|
Can the practice server run the same password as the actual event, as no GRC members can practice here, or do you want us to run our own practice server?
I didn't realise this wasn't just a SRou event
|
|
|
Logged
|
|
|
|
Jamera
|
|
« Reply #66 on: September 10, 2006, 05:17:44 PM +0100 » |
|
Hi Guys, Have just decided to join you for this tonight, though I haven't raced rFactor for months Am I right in saying the only things you can upgrade on the Demon are the wheels and force feedback? After about 9 laps I'm managing arounfd 1:41.xxx, so a way to go yet. Has anyone got a good race setup for this? Sorry lots of questions there
|
|
|
Logged
|
|
|
|
picnic
Director, Servers
SimRacing.org.uk Staff
Hero Member
Posts: 8114
|
|
« Reply #67 on: September 10, 2006, 05:23:30 PM +0100 » |
|
Am I right in saying the only things you can upgrade on the Demon are the wheels and force feedback?
After about 9 laps I'm managing arounfd 1:41.xxx, so a way to go yet. Has anyone got a good race setup for this?
You mean like the one Fozz posted two posts up
|
|
|
Logged
|
|
|
|
Dave 'Gizmo' Gymer
Director General
SimRacing.org.uk Staff
Hero Member
Posts: 15100
Currum auriga quasi furtivum
|
|
« Reply #68 on: September 10, 2006, 05:24:10 PM +0100 » |
|
Am I right in saying the only things you can upgrade on the Demon are the wheels and force feedback?
Yep.
|
|
|
Logged
|
To finish first, first you must have fins.
|
|
|
fozzmeister
|
|
« Reply #69 on: September 10, 2006, 05:31:56 PM +0100 » |
|
That's ok, but its progressed.
Not sure how great it is, but its significantly better than default anyway
================== VehicleClassSetting="2006 Demon" UpgradeSetting=(10,0) //VEH=GAMEDATA\VEHICLES\DEMON\NEC\NEC_86.VEH //UpgradeClass= //Tires=2 //Force Feedback=2 //Note: settings commented out if using the default
[GENERAL] Notes="" Symmetric=1 //CGRightSetting=0//50.0:50.0 //CGRearSetting=0//45.0:55.0 //WedgeSetting=0//0.00 turns //FrontTireCompoundSetting=0//Dry //RearTireCompoundSetting=0//Dry FuelSetting=39//40L (16laps) NumPitstopsSetting=1//1 Pitstop1Setting=69//70L (28laps) //Pitstop2Setting=49//N/A //Pitstop3Setting=49//N/A
[LEFTFENDER] //FenderFlareSetting=0//0.0 cm
[RIGHTFENDER] //FenderFlareSetting=0//0.0 cm
[FRONTWING] FWSetting=1//2
[REARWING] RWSetting=4//5
[BODYAERO] //RadiatorSetting=3//4 BrakeDuctSetting=2//3
[SUSPENSION] //FrontAntiSwaySetting=4//140 N/mm //RearAntiSwaySetting=3//50 N/mm FrontToeInSetting=16//-0.20 deg //RearToeInSetting=22//0.10 deg LeftCasterSetting=40//2.0 deg RightCasterSetting=40//2.0 deg //LeftTrackBarSetting=0//0.0 cm //RightTrackBarSetting=0//0.0 cm //Front3rdPackerSetting=0//0.0 cm //Front3rdSpringSetting=0//Detached //Front3rdSlowBumpSetting=0//1 //Front3rdFastBumpSetting=0//1 //Front3rdSlowReboundSetting=0//1 //Front3rdFastReboundSetting=0//1 //Rear3rdPackerSetting=0//0.0 cm //Rear3rdSpringSetting=0//Detached //Rear3rdSlowBumpSetting=0//1 //Rear3rdFastBumpSetting=0//1 //Rear3rdSlowReboundSetting=0//1 //Rear3rdFastReboundSetting=0//1
[CONTROLS] SteerLockSetting=9//14.0 deg RearBrakeSetting=42//54.0:46.0 BrakePressureSetting=4//88% //HandbrakePressSetting=0//0%
[ENGINE] //RevLimitSetting=0//7,500 //EngineBoostSetting=0//1 //EngineBrakingMapSetting=2//2
[DRIVELINE] //FinalDriveSetting=2//10/35 (bevel 1/ 1) //ReverseSetting=0//10/36 (12.600) Gear1Setting=3//20/67 (11.725) Gear2Setting=16//14/29 (7.250) Gear3Setting=28//20/31 (5.425) Gear4Setting=41//40/49 (4.287) Gear5Setting=47//10/10 (3.500) Gear6Setting=53//20/17 (2.975) //DiffPumpSetting=6//60% //DiffPowerSetting=0//0% //DiffCoastSetting=0//0% //DiffPreloadSetting=0//1 //RearSplitSetting=0// 0.0:100.0
[FRONTLEFT] CamberSetting=16//-3.4 deg PressureSetting=38//128 kPa //PackerSetting=5//0.5 cm //SpringSetting=2//120 N/mm //SpringRubberSetting=0//Detached RideHeightSetting=0//3.5 cm SlowBumpSetting=3//4 FastBumpSetting=3//4 //SlowReboundSetting=4//5 //FastReboundSetting=4//5 //BrakeDiscSetting=0//2.8 cm //BrakePadSetting=2//3
[FRONTRIGHT] CamberSetting=16//-3.4 deg PressureSetting=38//128 kPa //PackerSetting=5//0.5 cm //SpringSetting=2//120 N/mm //SpringRubberSetting=0//Detached RideHeightSetting=0//3.5 cm SlowBumpSetting=3//4 FastBumpSetting=3//4 //SlowReboundSetting=4//5 //FastReboundSetting=4//5 //BrakeDiscSetting=0//2.8 cm //BrakePadSetting=2//3
[REARLEFT] CamberSetting=22//-2.8 deg //PressureSetting=40//130 kPa //PackerSetting=5//0.5 cm //SpringSetting=2//120 N/mm //SpringRubberSetting=0//Detached RideHeightSetting=10//5.0 cm //SlowBumpSetting=2//3 //FastBumpSetting=2//3 SlowReboundSetting=3//4 FastReboundSetting=3//4 //BrakeDiscSetting=0//2.8 cm //BrakePadSetting=2//3
[REARRIGHT] CamberSetting=22//-2.8 deg //PressureSetting=40//130 kPa //PackerSetting=5//0.5 cm //SpringSetting=2//120 N/mm //SpringRubberSetting=0//Detached RideHeightSetting=10//5.0 cm //SlowBumpSetting=2//3 //FastBumpSetting=2//3 SlowReboundSetting=3//4 FastReboundSetting=3//4 //BrakeDiscSetting=0//2.8 cm //BrakePadSetting=2//3
[BASIC] Downforce=0.500000 Balance=0.500000 Ride=0.500000 Gearing=0.500000 Custom=1
|
|
|
Logged
|
|
|
|
picnic
Director, Servers
SimRacing.org.uk Staff
Hero Member
Posts: 8114
|
|
« Reply #70 on: September 10, 2006, 05:34:24 PM +0100 » |
|
Practice server restarted with race password to allow GCR boys some late practice
|
|
|
Logged
|
|
|
|
|
JonM_uk
|
|
« Reply #72 on: September 10, 2006, 06:32:44 PM +0100 » |
|
Any chance of swapping cars between races or will it be straight to race 2?
|
|
|
Logged
|
|
|
|
Dave 'Gizmo' Gymer
Director General
SimRacing.org.uk Staff
Hero Member
Posts: 15100
Currum auriga quasi furtivum
|
|
« Reply #73 on: September 10, 2006, 06:39:00 PM +0100 » |
|
Any chance of swapping cars between races or will it be straight to race 2?
There will be some sort of delay while I work out the grid and success ballast for race 2 so I expect you'll have time then.
|
|
|
Logged
|
To finish first, first you must have fins.
|
|
|
Jamera
|
|
« Reply #74 on: September 10, 2006, 08:09:52 PM +0100 » |
|
Just tried joining the server and got an incompitable game version message, I am using 1.070, has there been an update I've missed or is this a different issue?
|
|
|
Logged
|
|
|
|
|