Billy Nobrakes
UKGPL Divisional Moderator
UKGPL Moderators
Sr. Member
Posts: 3320
|
|
« on: January 25, 2017, 11:17:44 PM +0000 » |
|
Season 31- 67F1 Warm Up – Rouen As a warm up event for Season 31 we are running a 67F1 race at Rouen. This year is the 30th anniversary of the 1967 championship and the UKGPL season will take place on 10 of the 11 original circuits. To complete the set we are running a French GP as a non-championship event even though the real French GP took place at Le Mans Bugatti. The design team at Papyrus preferred Rouen. The championship will be split into a Works & Privateers division. The Rouen race is open to all on one grid. It might be busy, so first come first served. Race List = iGOR Server = UKGPL_8 IP = see iGOR Race date = Sunday 29-01-17 Time = 21:00 UK time (21:00 GMT) Track= Paoyrus Race length = 20 1aps (40 minutes) Variant = 1967 60fps patch used = 60fpsV2newmod Damage Model = Advanced Qualifying time = minimum 30 minutes Replays Available hereHANDICAPPING For this race only the Works standard drivers (you know who you are) are requested not to take the Eagle or Lotus. Unlimited Reset / Shift R are permitted, each followed by a compulsory Stop & Go within two laps. Please restrict chat to pit messages including at the end of the race until ALL drivers still racing have crossed the line. Password: see above
|
|
« Last Edit: January 29, 2017, 10:56:39 PM +0000 by Cookie »
|
Logged
|
Leading from the back at Black Night Racing
|
|
|
Billy Nobrakes
UKGPL Divisional Moderator
UKGPL Moderators
Sr. Member
Posts: 3320
|
|
« Reply #1 on: January 26, 2017, 07:37:01 AM +0000 » |
|
If you have not heard IGOR is fixed. You need to update the link in your Igor.INI file in the GPL secrets folder. Change "gplrank.info" to "blw.net". "Simples" as the meerkats would say.
|
|
« Last Edit: January 26, 2017, 07:38:38 AM +0000 by Billy Nobrakes »
|
Logged
|
Leading from the back at Black Night Racing
|
|
|
Walter Conn
Former UKGPL Moderators
Full Member
Posts: 939
|
|
« Reply #2 on: January 29, 2017, 02:04:17 AM +0000 » |
|
I have done a couple of offline races to try to improve. I am using paddle shifter and left foot braking this season because my G27 shifter pots need to be cleaned. The paddle shifters are fun because I have both hands on the wheel and a foot on the brake to help with car control. lol
|
|
|
Logged
|
Sunday Driver
|
|
|
dave curtis
UKGPL Server Provider
UKGPL Moderators
Sr. Member
Posts: 1528
|
|
« Reply #3 on: January 29, 2017, 07:17:44 AM +0000 » |
|
<SNIP!> my G27 shifter pots need to be cleaned. <SNIP!>
Walter, If you've had your G27 for less than 2 years [looks as though production may have ceased Dec 2015?] then raise a case with Logitech support pronto! Otherwise, I hope the flappy paddles won't make you even quicker! Cheers, Dave.
|
|
|
Logged
|
|
|
|
Arf Arf Arf
|
|
« Reply #4 on: January 29, 2017, 08:27:21 PM +0000 » |
|
If you have not heard IGOR is fixed. You need to update the link in your Igor.INI file in the GPL secrets folder. Change "gplrank.info" to "blw.net". "Simples" as the meerkats would say.
I have made the change (in GPLSecrets\iGOR\iGOR.ini). I can get into iGor ok, but chat doesn't seem to work.Keep getting 'error on joining chat'. any ideas?
|
|
|
Logged
|
|
|
|
Cookie
UKGPL Divisional Moderator
UKGPL Moderators
Hero Member
Posts: 6219
Chris Amon fan
|
|
« Reply #5 on: January 29, 2017, 08:30:25 PM +0000 » |
|
Colin, same here... edit But now it works
|
|
« Last Edit: January 29, 2017, 08:34:06 PM +0000 by Cookie »
|
Logged
|
Axel "Cookie"
poor, he who sees no stars without the punch in the face
an aphorism of Stanislaus Jercy Lec
|
|
|
dave curtis
UKGPL Server Provider
UKGPL Moderators
Sr. Member
Posts: 1528
|
|
« Reply #6 on: January 29, 2017, 10:21:15 PM +0000 » |
|
Apologies Roo, went wide to let you past easy & may have ran on the grass/span into you. Good to see you still retained the final position.
Cheers, Dave.
|
|
|
Logged
|
|
|
|
roo
|
|
« Reply #7 on: January 29, 2017, 11:04:13 PM +0000 » |
|
no worries Dave, I could see you were letting me past & knew instantly it was just bad luck. Luckily I could carry on & had a big gap to 3rd Overall a great race for me, & in a BRM too! After a clean start (where was Dean?) & first lap, I was trying to keep up with Axel's Ferrari but dropping back steadily. He had a spin & from then on it was a case of keeping it on the black stuff to the flag. I have been transitioning all 67's chassis to Feiner Kerl setups for some time now (don't get much seat time & haven't driven them for over a year really) & they are superb! They are nice & stable, which makes life easier, & I have been taking chunks out of my pb's - 0.6s off the BRM time today Thanks to the admins & for a full grid. Great to see
|
|
|
Logged
|
|
|
|
Walter Conn
Former UKGPL Moderators
Full Member
Posts: 939
|
|
« Reply #8 on: January 30, 2017, 02:51:14 AM +0000 » |
|
What a nice weekend! I was able to watch the Rolex 24 hr and then race at Rouen.
Congrats podium, especially Dean for starting in 20th position and finishing in third!
I made the gear ratio too high so that I reduce wheel spin. Then I adjusted the setup to be more balanced. At least, that was my idea. I was still tinkering with it as time ran out in qualifying. The race was lots of fun. I enjoyed the competition. Both David C. and Phil were able to pull alongside my car through Virage Samson. I stayed on my side of the track successfully. Although maybe I slowed down too much doing it. Good race everyone!
|
|
« Last Edit: January 30, 2017, 03:31:17 AM +0000 by Walter Conn »
|
Logged
|
Sunday Driver
|
|
|
DLogan
|
|
« Reply #9 on: January 30, 2017, 03:18:51 AM +0000 » |
|
I dropped myself to the back, as I'd made some changes and didn't want to be figuring out car while fighting (fast) others. Had a lot of fun coming back up through, tho. Here's the race set-up I used: http://www.filedropper.com/rouenbrabIt's still not happy with T1 or the last corner (probably 0.5 sec at least to be gained there), and none too stable under braking, but some may find it useful.
|
|
|
Logged
|
|
|
|
francesco
|
|
« Reply #10 on: January 30, 2017, 07:11:12 AM +0000 » |
|
Beatifull race,very fun.I have done some error but at least i have finished the race without my usual engine blow.Shame for Dony that have had an engine blow at the last lap,the batlle with him was fun.Instead to have a battle at the last curve against a Honda,was against a Ferrari but i have failed the breaking and the Ferrari was the winner
|
|
|
Logged
|
|
|
|
EvilClive
UKGPL Senior Consultant
UKGPL Moderators
Hero Member
Posts: 7751
I always play by the rules.... they are MY rules!
|
|
« Reply #11 on: January 30, 2017, 09:28:30 AM +0000 » |
|
no worries Dave, I could see you were letting me past & knew instantly it was just bad luck. Luckily I could carry on & had a big gap to 3rd Overall a great race for me, & in a BRM too! After a clean start (where was Dean?) & first lap, I was trying to keep up with Axel's Ferrari but dropping back steadily. He had a spin & from then on it was a case of keeping it on the black stuff to the flag. I have been transitioning all 67's chassis to Feiner Kerl setups for some time now (don't get much seat time & haven't driven them for over a year really) & they are superb! They are nice & stable, which makes life easier, & I have been taking chunks out of my pb's - 0.6s off the BRM time today Thanks to the admins & for a full grid. Great to see Grats to the podium guys and great to see a full grid again, it makes the racing so much more enjoyable for everyone I think. I tried the BRM too, but without the same pace or success. I have mentioned before that the BRM is a car that I have successfully avoided in my GPL career, But this season I have decided that it is a perfect opportunity to raise my GPL rank, as we are running the Papyrus circuits. I guessed at a setup and did some tweaking in setup. It was not perfect and was 90% stable, with a tendency to snap oversteer under braking if I backed off the gas too much. With no more time to fiddle it was race time and the start went well . I was able to follow the leading pack of 5 cars quite comfortably and wait for the tyres to warm up ( something that seems to be more important in the BRM?) Then I lifted too much for T1 and the engine decided to overtake the front axle. From the back of the field I gradually clawed my way back to 4th before another spin dropped me back again. Sorry to see Doni limping on the last lap after several laps off intense battling between us. Can you point me at those setups Roo? as a look at a setup that works might enable me to cure the gremlins in mine.
|
|
|
Logged
|
Evil Waza, now a completely reformed character! **NOW AVAILABLE ON TWITCH @ evilclive67 Rank Only when I sweat
|
|
|
b_1_rd
Former UKGPL Moderators
Full Member
Posts: 1182
|
|
« Reply #12 on: January 30, 2017, 10:53:26 AM +0000 » |
|
Had a bit of a torrid time with this. I'd seen the note about IGOR and changed the server name in the ini which worked for the races but not chat. A quick reboot sorted that for the first attempt but it seems hit and miss whether chat starts or not.
Joined the race server which froze before even connecting and went into a loop between the welcome screen and exit screen. Another reboot. This for some random reason seemed to wipe my 67 profile and wouldn't allow me to create another so spent 10 minutes sorting that out by deleting various files.
Eventually re-joined the server to find the wheel was off centre. Exit again and reset the wheel.
Finally got to do a few laps, but every time a chat notification came up my FPS dropped to 40. Found a quick fix to reduce font size to 0 in GPL Shift.
I'd decided to take the Honda as I wanted to get some times in for GPL Rank. But with the hassle prior to joining I was not really in the zone to concentrate with the Honda and wasn't performing very well with it.
After the third spin and what would have been a second reset, being well behind anyone else and not enjoying the experience, I called it a day.
I still don't think my PC is performing as it should with 60FPS despite buying a new video card and trying various tweaks to the NVidia profiles, so a bit more investigation to be done there. All mixed in with trying to moved house in the coming weeks. Life is a bit like spinning plates just now!
|
|
« Last Edit: January 30, 2017, 03:58:27 PM +0000 by b_1_rd »
|
Logged
|
Steve
Remember, you’re an individual, just like everyone else.
|
|
|
Billy Nobrakes
UKGPL Divisional Moderator
UKGPL Moderators
Sr. Member
Posts: 3320
|
|
« Reply #13 on: January 30, 2017, 12:43:00 PM +0000 » |
|
Steve, sounds like you were working with last years McLaren / Honda pit crew. They have promised to sort out next season. Stand out drives look to be Roo in the BRM & Francesco. I took the opportunity to try the Lotus but pushed the engine a bit to hard. Had some interesting racing early on.
|
|
|
Logged
|
Leading from the back at Black Night Racing
|
|
|
EvilClive
UKGPL Senior Consultant
UKGPL Moderators
Hero Member
Posts: 7751
I always play by the rules.... they are MY rules!
|
|
« Reply #14 on: January 30, 2017, 12:44:17 PM +0000 » |
|
@ Steve.
Sorry to hear of your woes, so FWIW.....
I have a very old PC ( by any current standards!) running on XP and as far as the frame rate drop is concerned I find that Pribluda has a massive impact.
67's are probably the least affected, as the graphics demands are not as great as some of the other mods, but even so if I have all of the various options displayed I can lose 20-25% frame rate. If I don't turn off everything except what I consider vital info ( relative position and tyre temps ) I can see FPS of 20 as we leave the grid and a max of 40FPS once rolling. With minmal Prib display it dips slightly off the grid, but will hold a rock steady 55-60FPS during racing. Some of the other mods require that I lose tyre temps as well, or even abandon Prib and rely on pit boards!!
Also, if "CHAT" is impacting on your frame rate so badly you can disable "in car chat" on the GPL options screen.
|
|
|
Logged
|
Evil Waza, now a completely reformed character! **NOW AVAILABLE ON TWITCH @ evilclive67 Rank Only when I sweat
|
|
|
|